Apraksts angļu valodā.
Encoder-controlled self-locking unit 24V - max. weight 600kg
ELECTROMECHANICAL DRIVE WITH 24V MOTOR
The automatic door drive consists of a self-locking gear motor with encoder control and integrated magnetic limit switches; the following are also installed:
-Electronic control unit;
- engine speed controller;
- engine thrust regulator;
-Double 8.2 KΩ input for connecting safety edges;
-Insertion for open collector radio receiver card.
The control allows quick setting of the system parameters such as sequential button mode, automatic reclosing, pre-flashing, flashing command, functional mode of the control lamp and the light barriers, etc. Compatible with the Prg-Link system for remote control and programming of the system parameters. For gate drives with opposite gate leaves, two gear motors can be connected in the master-slave configuration. Ideal for use with sliding gates up to 600kg for residential units and private properties. The device is equipped with a safe and reliable manual unlocking system with a personal key, which is protected with a plastic cover.
| brand |
Cardin
|
| Power supply |
230Vac
|
| frequency |
50Hz
|
| Power consumption |
0.8A
|
| Power consumption |
180W
|
| Duty cycle |
80%
|
| Displacement speed |
10 ... 16m / min
|
| Maximum torque |
21 Nm
|
| operating temperature |
-20 °… + 55 ° C
|
| Degree of protection |
44IP
|
| Motor power supply |
24Vdc V
|
| Maximum power consumption |
200W
|
| Maximum power consumption |
8A
|
| Model |
SLACE 601
|
